Waste Water Treatment Systems
TT-125 Brochure.
FEATURES:
Sophisticated, yet user-friendly technology. 200SA Brochure
Guaranteed to meet local sewer discharge limits.
Excellent choice for recycling.
Clear advantages over ultra filtration and evaporation.
No hazardous by-products.
Compact: typical dimensions are only 80" x 70"
Batch Sizes of 65, 200, 350, 500, 750, 1000 gallons.
Cycle takes 30 minutes and requires only 10 minutes
of low skilled attendance.
Very low maintenance.
Handles almost any aqueous based fluid, including
metal plating, vibratory, equipment and parts washing,
floor cleaning, metal working fluids, etc.
TT-125 Brochure.
FEATURES:
Sophisticated, yet user-friendly technology. 200SA Brochure
Guaranteed to meet local sewer discharge limits.
Excellent choice for recycling.
Clear advantages over ultra filtration and evaporation.
No hazardous by-products.
Compact: typical dimensions are only 80" x 70"
Batch Sizes of 65, 200, 350, 500, 750, 1000 gallons.
Cycle takes 30 minutes and requires only 10 minutes
of low skilled attendance.
Very low maintenance.
Handles almost any aqueous based fluid, including
metal plating, vibratory, equipment and parts washing,
floor cleaning, metal working fluids, etc.
| If you have any questions or would like pricing information. Please contact our sales department. Sales or call 800-404-4268 |
| WE FINISH WHAT YOU START |
Here is an example how the system works ...
The RT Unit is Filled with effluent. The turbine mixer is
started and DH Reactant is added. After 5 minutes of
mixing a large floc will form. The mix of the floc will sink to
the bottom of the tank, usually in a couple of
minutes.
Once the settling, or phasing, of the floc has occurred,
draining and filtering begins. Clarified water from the
upper area of the tank is drained first, followed by the floc
(sludge). Filter media captures the solids, allowing the
clarified water through to a clean compartment. A
discharge pump automatically transfers the fluids to
sewer or recycling vessel.
An Automated conveyor advances the filter media and
sludge as needed. This usually requires only 5 feet of
filter media and sludge for disposal. The sludge dries to a
cake, without need of a filter press. The process is now
complete. The water will pass local discharge limits, and
the sludge will pass TCLP.
The RT Unit is Filled with effluent. The turbine mixer is
started and DH Reactant is added. After 5 minutes of
mixing a large floc will form. The mix of the floc will sink to
the bottom of the tank, usually in a couple of
minutes.
Once the settling, or phasing, of the floc has occurred,
draining and filtering begins. Clarified water from the
upper area of the tank is drained first, followed by the floc
(sludge). Filter media captures the solids, allowing the
clarified water through to a clean compartment. A
discharge pump automatically transfers the fluids to
sewer or recycling vessel.
An Automated conveyor advances the filter media and
sludge as needed. This usually requires only 5 feet of
filter media and sludge for disposal. The sludge dries to a
cake, without need of a filter press. The process is now
complete. The water will pass local discharge limits, and
the sludge will pass TCLP.
| PHONE 800-GO-GIANT 800-404-4268 EMAIL Sales Engineering |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |