| PHONE 800-GO-GIANT 800-404-4268 EMAIL Sales Engineering |
| WE FINISH WHAT YOU START |
| Deburring compounds and chemicals |
Compounds designed to be used with ceramic or plastic media while cleaning and deburring
ferrous, non-ferrous and non-metallic parts. These compounds can be used in vibratory bowls
and tubs and centrifugal disk machines. Please inquire as to suitability for barrel finishing
machines. All of our liquid chemical compounds are available in 1,5 and 55 gallon containers.
ferrous, non-ferrous and non-metallic parts. These compounds can be used in vibratory bowls
and tubs and centrifugal disk machines. Please inquire as to suitability for barrel finishing
machines. All of our liquid chemical compounds are available in 1,5 and 55 gallon containers.
M-111 Non-Ferrous Deburring
This is a good general purpose compound for use with aluminum, zinc, brass, bronze or
other non- ferrous metals. It can also be used on ferrous parts to clean light soils and
brighten the metal. At a concentration of 1/2 to 1 ounce per gallon of water M-111 will clean
soils from the parts, leave an excellent, corrosion resistant cosmetic finish while keeping the
media clean.
M-200 Burnishing and Cleaning Ferrous & Non-Ferrous
This compound is specially formulated as a gentle cleaning and burnishing compound used
to develop a lustrous finish on ferrous and non-ferrous parts. M-200 can be used with either
steel or porcelain media in a vibratory finishing machine or a tumbling barrel. Its mild
detergents will clean the part during the process and its inhibitors will keep the shine on the
part indefinitely.
M-222 Non-Ferrous Deburring
An inexpensive compound for cleaning and deburring non-ferrous metals. When used at 1/2
to 1 ounces per gallon of water parts will come out clean, with good cosmetic color and will
resist oxidation.
M-224 Ferrous Deburring
An inexpensive compound for cleaning and deburring ferrous metals.When used at 1/2 to 1
ounces per gallon of water parts will come out clean, with good cosmetic color and will resist
oxidation.
MX-226 Non-Ferrous Cleaning & Deburring
This compound is formulated to clean and brighten all metals while using ceramic or plastic
media. When used at the recommended concentration between 1/2 to 1 ounce per gallon of
water it will clean the toughest soils from even hard to reach interior corners. Completely
safe, biodegradable and inexpensive, this compound is recommended for deburring,
cleaning and brightening steel, aluminum and zinc and can also be used on copper, nickel
and other metals.
MX-228 Ferrous and Non-Ferrous Cleaning and Deburring
This is a good cleaning and excellent inhibiting compound designed to keep ceramic and
plastic media sharp while emulsifying and removing oils from parts. Safe, biodegradable and
inexpensive, this compound is an excellent choice for general deburring operations.
P-12 Cleaning and Deburring
This is a medium to heavy duty cleaning powder designed for use on ferrous or non-ferrous
metals in vibratory finishing equipment or tumbling barrels using ceramic, plastic or other
media. P-12 contains readily biodegradable surfactants that will clean and brighten while
cushioning the parts. Its inhibitors will prevent corrosion on all metals for extended periods.
P-89 Abrasive Finishing
This compound contains brown aluminum oxide grit to accelerate the deburring process.
The additional abrasive helps remove difficult burrs, radius edges quickly and can even
remove burrs in hard to reach areas. P-89 is also and excellent cleaner, leaving the parts
with a light, matte finish after processing.
P-90 Abrasive Finishing
This compound contains the same brown aluminum oxide grit as P-89 in a higher
concentration to accelerate the deburring process. It contains mild cleaners and will remove
light soils.
P-95 Abrasive Finishing
This is a white abrasive compound for quick burr removal and fast cleaning. Its fine, high
grade abrasives impart an excellent finish on all metals. P-95 can be used with ceramic
media to accelerate burr removal or in a slurry for fine finishing. Recommended for use on
medical implements.
This is a good general purpose compound for use with aluminum, zinc, brass, bronze or
other non- ferrous metals. It can also be used on ferrous parts to clean light soils and
brighten the metal. At a concentration of 1/2 to 1 ounce per gallon of water M-111 will clean
soils from the parts, leave an excellent, corrosion resistant cosmetic finish while keeping the
media clean.
M-200 Burnishing and Cleaning Ferrous & Non-Ferrous
This compound is specially formulated as a gentle cleaning and burnishing compound used
to develop a lustrous finish on ferrous and non-ferrous parts. M-200 can be used with either
steel or porcelain media in a vibratory finishing machine or a tumbling barrel. Its mild
detergents will clean the part during the process and its inhibitors will keep the shine on the
part indefinitely.
M-222 Non-Ferrous Deburring
An inexpensive compound for cleaning and deburring non-ferrous metals. When used at 1/2
to 1 ounces per gallon of water parts will come out clean, with good cosmetic color and will
resist oxidation.
M-224 Ferrous Deburring
An inexpensive compound for cleaning and deburring ferrous metals.When used at 1/2 to 1
ounces per gallon of water parts will come out clean, with good cosmetic color and will resist
oxidation.
MX-226 Non-Ferrous Cleaning & Deburring
This compound is formulated to clean and brighten all metals while using ceramic or plastic
media. When used at the recommended concentration between 1/2 to 1 ounce per gallon of
water it will clean the toughest soils from even hard to reach interior corners. Completely
safe, biodegradable and inexpensive, this compound is recommended for deburring,
cleaning and brightening steel, aluminum and zinc and can also be used on copper, nickel
and other metals.
MX-228 Ferrous and Non-Ferrous Cleaning and Deburring
This is a good cleaning and excellent inhibiting compound designed to keep ceramic and
plastic media sharp while emulsifying and removing oils from parts. Safe, biodegradable and
inexpensive, this compound is an excellent choice for general deburring operations.
P-12 Cleaning and Deburring
This is a medium to heavy duty cleaning powder designed for use on ferrous or non-ferrous
metals in vibratory finishing equipment or tumbling barrels using ceramic, plastic or other
media. P-12 contains readily biodegradable surfactants that will clean and brighten while
cushioning the parts. Its inhibitors will prevent corrosion on all metals for extended periods.
P-89 Abrasive Finishing
This compound contains brown aluminum oxide grit to accelerate the deburring process.
The additional abrasive helps remove difficult burrs, radius edges quickly and can even
remove burrs in hard to reach areas. P-89 is also and excellent cleaner, leaving the parts
with a light, matte finish after processing.
P-90 Abrasive Finishing
This compound contains the same brown aluminum oxide grit as P-89 in a higher
concentration to accelerate the deburring process. It contains mild cleaners and will remove
light soils.
P-95 Abrasive Finishing
This is a white abrasive compound for quick burr removal and fast cleaning. Its fine, high
grade abrasives impart an excellent finish on all metals. P-95 can be used with ceramic
media to accelerate burr removal or in a slurry for fine finishing. Recommended for use on
medical implements.
Not seeing what your looking for, contact our chemist so that we can create a special
compound for you. Sales or call 800-404-4268
compound for you. Sales or call 800-404-4268
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |